Blog

Filter by tags

Latest posts

5 min read

Z-Wave limitations: where Z-Wave falls short in modern IoT systems

Z-Wave is a well-established wireless communication protocol widely used in home automation and smart building applications. It is known for low power consumption, sub-GHz operation, and mesh networking capabilities. In many scenarios, Z-Wave performs reliably and meets the requirements of typical smart home deployments. However, as IoT systems evolve toward larger scale, higher complexity, and […]

Z-Wave limitations: where Z-Wave falls short in modern IoT systems
4 min read

Large-Scale IoT: How to Build Networks That Actually Scale

Large-Scale IoT: How to Build Networks That Actually Scale Introduction Large-scale IoT sounds straightforward in theory. Connect devices. Collect data. Scale the system. But in practice, things start to break much earlier than expected. A network that works perfectly with 50 devices often becomes unstable at 200. At 500, latency increases. At 1000+, communication becomes […]

Large-Scale IoT: How to Build Networks That Actually Scale
5 min read

What Network Technology Can Host 1000+ IoT Devices?

Introduction At small scale, many wireless technologies look good on paper. A pilot with 20, 50, or even 100 devices may work well enough to move a project forward. The real challenge begins later, when the same system has to support hundreds or thousands of devices in one deployment. This is the point where architecture […]

What Network Technology Can Host 1000+ IoT Devices?

Contact us

Any question or remarks? Just write us a message!

Contact Information

Feel free to get in touch